The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”
Sleek, aerodynamic ski rack for all types of skis and snowboards. - Holds skis and snowboards securely with ultra-soft rubber arms that grip without scratching the surfaces - Safely carries thicker modern skis and snowboards and reduces the carrier height when unloaded with an integrated vertical spring system - Easy to open and close while wearing gloves, thanks to an oversized push button - Added roof clearance for skis with tall bindings, thanks to included extension feet that raise the carrier - Fits Thule rack systems, round bars, and most factory racks with both T-Track and SpeedLink around-the-bar mounting options - Holds up to 6 pairs of skis or 4 snowboards Technical specifications - Dimensions: 34.2 x 2.8 x 3.9 inch - Loading width: 29.5 inch
-Extends the Mini Skinny by 14" -Integrated 9mm Fork Mount -Retains 50% of usable crossbar space -Locking roof bar mounts -Basket comes fully assembled
Thule's ThruRide roof-mounted bike carrier makes it easy to mount almost any bike with a thru-axle fork—no adapters needed. The ThruRide fits forks with 12-20mm thru-axles on anything from fat bikes to XC race rockets to downhill rigs. To load your bike, simply remove the front wheel and re-install the thru-axle into the fork. Lift the bike into the rack, and close the convenient one-handed clamp down on the axle. Then, dial down the clamping pressure to give your bike a secure ride. The ThruRide also works with traditional 9mm quick release forks using an adapter (535SKR sold separately). The rear of the rack is crafted from Thule's aerodynamic "D" shaped low-profile tray. And, tool-free universal mounting makes the ThruRide easy to install on Thule rack systems, as well as round bars and most factory racks.
Always forgetting the thru-axle adapter for your roof rack? Kuat solved that problem for you: The TRIO can handle almost any bike you own. The unique mounting system fits quick release as well as 15mm and 20mm thru-axles. It will even play nice with fat bikes with the optional adapter kit (sold separately). The TRIO mounts to most factory and aftermarket crossbars and features an integrated cable lock. - 1 Bike Capacity (45 lbs max) - 3 Way Mount-Fits 9, 15, & 20 mm forks out of the box - Optional adapter kit for fat bikes (sold separately) - Mounts to most factory & all aftermarket cross bars - Integrated Cable Lock (locks both frame and rear wheel) - Sliding rear tire strap - Up to 4 feet between cross bars. - Max crossbar size-3.5” wide by 1.7” thick - Weight-7 lbs - Dims-56” x 4” x 1 3/8”
Got a Texas-sized SUV equipped with Yakima's MegaWarrior rooftop carrier? Then you may need Yakima's MegaWarrior Extension. It's constructed of heavy-duty, weather-resistant steel and it adds 22 inches and 40% more carrying capacity to Yakima's MegaWarrior rooftop basket (sold separately).
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
Loading your boat has never been easier than this! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. The spring-loaded base automatically adjusts to boat when loading. - Mounts to any bar type without tools, making installation a cinch. easy loading Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory and aerodynamic bars Spring-loaded base automatically adjusts to boat when loading - Smooth molded pad hugs and protects multiple boat types - Tilting paddle technology to accommodate an array of boats and roof rack systems - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lbs Minimum crossbar spreads of 24\u001D or more
The RockyMounts Tomahawk low-profile upright mount that's easy to use and even easier on your wallet. Fat-bike ready out of the box (up to 5" tires), and will hold all styles of bikes, road, mountain, cruiser, and childrens (20 - 29" wheels). Features: - No bike frame contact - simply ratchet the hook over the front wheel and secure the front/rear wheelstraps - Fat bike ready (up to 5" tires) out of the box. Includes two wheel strap extensions - Swingarm easily adjusts for driver side and passenger side installation - Mounts to all styles of crossbars - round, square, factory, aero - Holds all styles of bikes, 20 - 29" wheels (except those with front fenders) - New Easy-Load wheel straps make loading bikes easier than ever - Optional 2-pack locks (sold separately) lock rack to car and bike to rack
Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.
The LoadWarrior is the perfect accessory to boost the carrying capacity of your Yakima roof rack, plus it fits many other racks, too. Ingeniously, bike mounts attach directly to the basket to make carrying bikes easy, too. This cargo carrier is big enough to handle all your gear. The LoadWarrior even comes with a custom fairing that cuts wind drag and noise.
Yakima's caged beast offers monstrous carrying capacity. The MegaWarrior is a perfect fit for mid- to full-size sport-utility vehicles and it's made of heavy-duty steel. You can easily attach bike mounts directly with its movable accessory bar and a custom fairing is included to cut wind noise and protect your cargo. The MegaWarrior's universal mounting hardware fits round and square crossbars, plus many factory racks, too.
This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Thule's Traverse Short Roof Adapter enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It's designed for use with the Traverse Foot System and Rapid Aero or square crossbars.
Yakima's Q Stretch Kit enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It works with Q Towers.
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Secure, sleek, and simple to use, the HighRoad is Yakima’s newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Optional SKS Locks (2) can be added to secure your bike and the mount to your vehicle. - New wheel hoop fits 26” to 29” wheels and tires from 23mm to 3.25” with no adjustment needed - New integrated TorqueRight knob quickly and easily secures the bike with precision - Requires no wheel removal and makes no contact with the bike frame - a great option for carbon fiber bikes and custom paint jobs - Sleek, low profile tray minimizes hatch interference - Tool-free, universal mounting hardware fits most roof racks - Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit (sold separately) - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately) TECHNICAL SPECS - Weight: 24.00 lbs - Dimensions: L 20.00” x W 20.00” x H 5.00”
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Page 1 of 3 Next page